home *** CD-ROM | disk | FTP | other *** search
/ CD ROM Paradise Collection 4 / CD ROM Paradise Collection 4 1995 Nov.iso / system / dman131.zip / DRIV_MAN.HLP < prev    next >
Text File  |  1995-01-01  |  18KB  |  347 lines

  1. P---+---T1----+LT--2----T----3--T-+----4T---+---T5----+-T--6----T----7--J
  2. L---+---T1----+-T--2----T----3--T-+----4T---+---T5----+-T--6----T----7--J
  3. This  help  file  is user editable.  Form Feed and  Paragraph  characters 
  4. (ASCII  12  and 20)  are how the program recognizes help pages  and  help 
  5. leaves within pages and should not be removed. 
  6.  
  7. 0HELP INDEX
  8. SECTION                                                         HELP PAGE
  9. ─────────────────────────────────────────────────────────────────────────
  10. INTRODUCTION........................................................ 1
  11. COMMAND LINE PARAMETERS............................................. 2
  12. ACTION KEYS and DISPLAY INFORMATION................................. 3
  13. [F2] EDITING THE DISK DRIVE RANGE................................... 4
  14. [F3] STORING THE DATA............................................... 5
  15. [F10] EXTENDED FILE INFORMATION..................................... 6
  16. [ENTER] RUNNING THE FILE MANAGER.................................... 7
  17. CONFIGURATION FILE.................................................. 8
  18. SHAREWARE REGISTRATION, SUPPORT INFORMATION......................... 9
  19.  
  20. If a Mouse is used, LEFT=ENTER, RIGHT=ESCAPE, (optional)CENTER=F1-Help.
  21.  
  22. In this Help Module, the use of brackets [ ] denotes a specific key. 
  23.  
  24. Parenthesis ( ) are used for comments. 
  25.  
  26. The bottom line of the display is used for help  key information, showing 
  27. the currently active help action keys and their function. 
  28.  
  29. 1INTRODUCTION
  30. DRIV_MAN  is  a  disk  utility management tool  that  displays  pertinent 
  31. logical  disk  drive data - up to twenty-six drives - on a SINGLE  SCREEN 
  32. for analysis/storage. 
  33.  
  34. The DRIV_MAN display includes: DRIVE DATA SUMMARY with capacity, used and 
  35. free  for  each available/selected drive,  DRIVE DATA GRAPH with the same 
  36. data for each drive,  TOTAL DISK SUMMARY and GRAPH,  and INDIVIDUAL DRIVE 
  37. DATA displaying information on one drive at a time. 
  38.  
  39. Program options include: Toggle any of six sort orders for the DRIVE DATA 
  40. SUMMARY,  selectable/editable  display  DRIVE RANGE,  disk storage of the 
  41. DISK DRIVE SUMMARY display,  and the ability to run a file manager, FILE-
  42. MAN, from within the program. 
  43.  
  44. Registered users may also change the various display colors, the location 
  45. of the display sections, and various setup parameters. 
  46.  
  47. 2COMMAND LINE PARAMETERS
  48. The syntax for DRIV_MAN is:
  49.  
  50. [drive:path]DRIV_MAN [[first_drive][-][last_drive]][/a][/c][/gxxx][/m]
  51.  
  52.       where:
  53.          first_drive default = C
  54.           last_drive default = LASTDRIVE as defined in DOS/CONFIG.SYS
  55.  
  56.          /a  = Automatically run DRIV_MAN and store the display.
  57.          /c  = Force CGA monitor.
  58.      (/g)xxx = Optional configuration file extension (default is CFG).
  59.                Use of the configuration file is limited to registered 
  60.                users only. Example: /gcg2 will use "DRIV_MAN.CG2".
  61.          /m  = Force monochrome monitor.
  62.  
  63. Press [PAGEDOWN] for some first_drive - last_drive examples.
  64. DRIV_MAN COMMAND LINE FIRST-LAST DRIVE EXAMPLES
  65. ═══════════════════════════════════════════════
  66.  
  67.    SYNTAX              DRIVES DISPLAYED
  68. ════════════           ═════════════════
  69. DRIV_MAN               C D . . LASTDRIVE
  70. DRIV_MAN D             D
  71. DRIV_MAN D-            D E . . LASTDRIVE
  72. DRIV_MAN -             C D . . LASTDRIVE
  73. DRIV_MAN D-F           D E F
  74. DRIV_MAN B-F           B C D E F
  75. DRIV_MAN C-C           C
  76. DRIV_MAN -E            C D E
  77.  
  78. 3ACTION KEYS and DISPLAY INFORMATION
  79. ACTION KEYS - These keys are active when the program is waiting for input 
  80.               at the main display. 
  81. [F1]─────────Display the Help Information (this display).
  82. [F2]─────────Change the range of the displayed drives.
  83. [F3]─────────Store the current data at the end of the file DRIV_MAN.DAT.
  84. [F10]────────Read all drives and display extended drive information.
  85. [ESC]────────Exit the program.
  86. [ENTER]──────Shell out to the specified file manager.
  87. [LEFTARROW]─┬Sort the DRIVE DATA SUMMARY/GRAPH information. The order 
  88. [RIGHTARROW]┘ will toggle through: Drive Letter, Capacity, Utilization,
  89.               % Utilization, Free, and % Free (reverse of % Utilization).
  90. [char]──────┬Change the INDIVIDUAL DRIVE DATA display.
  91. [HOME]──────┤
  92. [END]───────┤
  93. [UPARROW]───┤
  94. [DOWNARROW]─┤
  95. [PAGEUP]────┤
  96. [PAGEDOWN]──┘
  97. DISPLAY INFORMATION
  98.                                         ╔═══════════════════════════════╗
  99. The  DRIV_MAN SINGLE SCREEN display is  ║<──────────HEADER─────────────>║
  100. divided into several SECTIONS -  DRIVE  ║┌DRIVE DATA┐┌DRIVE DATA───────┐║
  101. DATA GRAPH,  DRIVE DATA SUMMARY, TOTAL  ║│░░░░░░░░░░││▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓│║
  102. DISK SUMMARY,  TOTAL DISK GRAPH,   and  ║│░░░░░░░░░░││▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓│║
  103. INDIVIDUAL DRIVE DATA - as depicted in  ║│░░░░░░░░░░│└──────────SUMMARY┘║
  104. this diagram. ═════════════════════>    ║│░░░░░░░░░░│┌TOTAL DISK───────┐║
  105.                                         ║│░░░░░░░░░░│└──────────SUMMARY┘║
  106. The display, color,  and  position  of  ║│░░░░░░░░░░│┌TOTAL DISK───────┐║
  107. each  SECTION  can  be  controlled  by  ║└─────GRAPH┘└────────────GRAPH┘║
  108. registered users  with the  use of the  ║┌INDIVIDUAL───────────────────┐║
  109. optional configuration file.            ║│▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒│║
  110.                                         ║└───────────────────DRIVE DATA┘║
  111. The HEADER  and  each  SECTION are de-  ║<──program/registration info──>║
  112. scribed  in  the following paragraphs.  ║<─────────help line───────────>║
  113. To display them, press [PAGEDOWN].      ╚═══════════ SCREEN ════════════╝
  114. HEADER
  115.  
  116. The left portion of the header  ═╡ DRIVe_MANagement Disk (C-Z) Summary ╞═
  117. line  denotes  the  first  and 
  118. last   logical   disk   drives 
  119. included in the summary. These 
  120. drives may range between A and 
  121. Z.   Unless they are specified 
  122. on the command line they  will 
  123. be C-LASTDRIVE,  as defined by 
  124. DOS. This range may be changed
  125. by pressing [F2].
  126.  
  127. The date and time, in 24  hour                       ═╡ 11/13/92 16:22 ╞═
  128. notation,   are shown  in  the 
  129. right portion of the header.
  130. DRIVE DATA SUMMARY
  131.  
  132. Drive data for each selected and available logical disk drive is shown in 
  133. two columns: A-M on the left and N-Z on the right, in Drive Letter Order.
  134.  
  135. Drive Free Storage, Kilobytes(k) or Megabytes(m)───────────────────┐
  136. Drive Used Storage, rounded to the nearest Percent(%)───────────┐  │
  137. Drive Used Storage, Kilobytes(k) or Megabytes(m)─────────┐      │  │
  138. Drive CAPacity, rounded to the nearest Megabyte─────┐    │      │  │
  139. Logical disk DRive────────────────────────────────┐ │    │      │  │
  140. ╔═════════════════════════════════════════════╗                
  141. ║Drive data may be sorted (use the [LEFTARROW]║  │D Cap  Utilized   Free│
  142. ║[RIGHTARROW] keys) in any of the following   ║  │R  Mb  Mb/Kb  %  Mb/Kb│
  143. ║orders (shown in Drive Letter Order):        ║ │                      │
  144. ║        Drive Letter                         ║  │C  33  14.0m 42  19.4m│
  145. ║        Capacity                             ║  │D  67  39.2m 59  27.6m│
  146. ║        Utilization    ___ - Network drives  ║  │E  67  27.7m 41  39.1m│
  147. ║        % Utilization  ... - Non-hard/floppy ║  │F__67__36.7m_55__30.1m│
  148. ║        Free                   drives        ║  │                      │
  149. ╚════════% Free (reverse of % Utilization)════╝  │M...1...0.0k..0.520.2k│
  150. TOTAL DISK SUMMARY AND GRAPH
  151.  
  152. The  TOTAL DISK SUMMARY is  ┌Total Bytes CAPACITY = 763,469,824─────────┐
  153. self-explanatory.    Total  │Total Bytes UTILIZED = 410,521,600 (54%)   │
  154. Bytes  Utilized  is calcu-  └────Total Bytes FREE = 352,948,224 (46%)───┘
  155. lated as  Total Bytes Cap-
  156. acity  minus   Total Bytes 
  157. Free. 
  158.  
  159. The TOTAL DISK GRAPH shows  ┌0%  10  20  30  40  50  60  70  80  90  100┐
  160. two bars: the first is the  └▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀┘
  161. percent  UTILIZED and  the 
  162. second percent FREE.
  163.  
  164. TOTAL DISK data  includes  only  those  drives  that were  selected - the 
  165. default is all drives to display and use.
  166. DRIVE DATA GRAPH (Capacity or Percent)      130▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒Z
  167.                                             123░░░░░░░░░░░░░░░░░░░░░░░░░│
  168. The  DRIVE  DATA GRAPH is scaled to  the    116▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒│
  169. largest  logical  drive  selected/avail-    109░░░░░░░░░░░░░░░░░░░░░░░░░│
  170. able.   Each  logical  drive's  data  is    102▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒│
  171. displayed in a single column, from A-Z.      95░░░░░░░░░░░░░░░░░░░░░░░░░│
  172.                                              88▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒│
  173. The  drive's  CAPACITY is denoted by the     82░░░░░░░░░░░░░░░░░░░░░░░░░│
  174. display of two drive letters.  The lower     75▒▒▒▒▒▒▒▒▒▒K▒▒▒▒▒▒▒▒▒▒▒▒▒▒│
  175. bar  depicts  the portion of  the  drive     68░░░░░░░░░░│░░░░░░░░░░░░░░│
  176. utilized  and the upper bar is for  that     61▓▓▓DEFGHIJ│▓▓▓▓▓▓▓▓▓▓▓▓▓▓│
  177. amount which is free. On color monitors,     54░░░││││││║│░░░░░░░░░░░░░░│
  178. the utilized and free bars are displayed     47▒▒▒││││║│║│▒▒▒▒▒▒▒▒▒▒▒▒▒▒║
  179. in different color.                          41░░░║│││║│║│░░░░░░░░░░░░░░║
  180.                                              34▒▒▒║│║│║║║║▒▒▒▒▒▒▒▒▒▒▒▒▒▒║
  181. The example at the  right  shows Drive C     27░░C║║║│║║║║░░░░░░░░░░░░░░║
  182. has   a  CAPACITY  between  32   and  39     20▒▒│║║║║║║║║▒▒▒▒▒▒▒▒▒▒▒▒▒▒║
  183. Megabytes(Mb)  and a UTILIZATION between     13░░║║║║║║║║║L░░░░░░░░░░░░Y║
  184. 13  and 19 Mb.  Drive M has both figures      6▒▒║║║║║║║║║║▒▒▒▒▒▒▒▒▒▒▒▒║║
  185. between 0 and 6 Mb.                        Mb 0░░CDEFGHIJKLM░░░░░░░░░░░YZ
  186. INDIVIDUAL DRIVE DATA
  187. The  INDIVIDUAL DRIVE DATA section is at the lower portion of the  screen 
  188. and may be scrolled, either by pressing the desired DRIVE LETTER or using 
  189. the cursor arrow keys. Its four portions are detailed below:
  190.  
  191. Logical   DISK  DRIVE  whose  data  is  being           ┌┤ DRIVE C ├─────
  192. displayed and its Volume Label.                         └┤ SYSTEM-4C    ├
  193.  
  194. Selected logical drive CAPACITY in bytes.               ┤ CAPACITY ├─────
  195.                                                         ┤ 33,431,552    ├
  196.  
  197. Selected logical drive USED STORAGE in  bytes       ┤ UTILIZED ( 44.3%) ├
  198. and percentage.                                     ┤ 14,612,480    ├────
  199.  
  200. Selected  logical drive FREE STORAGE in bytes          ┤ FREE ( 55.7%) ├┐
  201. and percentage.                                        ┤ 18,819,072    ├┘
  202.  
  203. ->·To display another DRIVE's full data,  press the desired DRIVE  letter 
  204. or used the cursor arrow keys - [HOME] [END] [UPARROW] [DOWNARROW] 
  205. [PAGEUP] [PAGEDOWN]
  206. EXTENDED DRIVE INFORMATION
  207.  
  208. When  [F10]  is  pressed,  all selected disk drives are  re-read  and  an 
  209. EXTENDED  DRIVE INFORMATION window is displayed for each drive  in  turn. 
  210. The   displayed   information  includes  the  drive's   sector's/cluster, 
  211. available clusters,  bytes/sector,  clusters/drive,  capacity,  and  free 
  212. space.  For drives on this system, the drive's sectors/drive and capacity 
  213. including  bad  sectors is also given.  This data,  for  non  hard/floppy 
  214. drives and network drives, is not available. 
  215.  
  216. ─>·To cancel the EXTENDED DRIVE INFORMATION display, press [ESCAPE].
  217.  
  218. 4[F2] EDIT DISK DRIVE RANGE 
  219. The  selected  disk  DRIVE  RANGE may be changed and re-displayed without 
  220. exiting  and  re-running  DRIV_MAN.   Especially  useful  in  a   network 
  221. environment, the range can be set for the physical drives of each system. 
  222.  
  223. ->·To  change  the  selected/displayed  DRIVE RANGE,   press  [F2].   The 
  224. currently selected DRIVE RANGE is displayed.  Edit the DRIVE RANGE, using 
  225. the control keys noted on the bottom line,  as it would have been entered 
  226. on the command line.  When editing is complete,  press [┘].
  227.  
  228. ─>·To leave the DRIVE RANGE as it was before editing, press [ESCAPE]. 
  229.  
  230. 5[F3] STORE DATA
  231. The DRIV_MAN screen display,  of  the Disk Summary Data, may  be saved to 
  232. allow comparisons with previous or future displays. 
  233.  
  234. Using this feature,  a snapshot may be saved before cleaning up a logical 
  235. drive/drives  and then another  snapshot saved afterward, for comparison. 
  236. Another  use  is  to take Disk Summary snapshots monthly to see  how  the 
  237. system's disk status is changing over time. 
  238.  
  239. ->·To  store the screen display,  press [F3].  The screen display will be 
  240. stored  in  a  file  named "DRIVE_MAN.DAT",   and  a  completion  message 
  241. displayed.  If this file already exists,  on the drive-directory on which 
  242. the program is located,  the current data will be APPENDED to it.  If the 
  243. file  does not exist,  it will be CREATED on the same drive-directory  as 
  244. the program. 
  245.  
  246.  [F10] EXTENDED DRIVE READ AND DISPLAY
  247. The  normal  drive  information  is obtained  through  the  DOS  software 
  248. interrupt  21H,   Function  36H,   "Get  Drive  Allocation  Information". 
  249. Additional   information  may  also  be  obtained  from   Function   44H, 
  250. Subfunction 0DH,  Minor Subfunction 60H,  "IOCTL: Generic I/O Control for 
  251. Block  Devices,   Get  Device Parameters".  Only a limited  set  of  this 
  252. information  can  and  is presented on  the  SINGLE  SCREEN  information. 
  253. However,   all  of the data can be displayed,  one drive at a  time,   if 
  254. desired. 
  255.  
  256. ->·To display EXTENDED FILE INFORMATION for all displayed drives,   press 
  257. [F10].  EXTENDED FILE INFORMATION for the first drive will be shown,   as 
  258. seen below. The first six pieces of data are obtained with the "Get Drive 
  259. Allocation" interrupt. 
  260.  
  261. NOTE:   For  Novell networks,  a  problem exists in that  drives  may  be 
  262. formatted with more than 65,536 clusters/drive. To date, we have not been 
  263. able  to  find a DOS function that will determine the correct  number  of 
  264. clusters per drive.  Therefore,  for these drives,  the reported capacity 
  265. will  be incorrect.  This problem does not occur with drives  partitioned 
  266. with the DOS program FDISK. 
  267.  
  268. The last two, denoted by stars, '*', are from the "IOCTL" interrupt.
  269.  
  270. NOTE:   The  starred Sectors/drive and the calculated  Capacity  normally 
  271. include disk space not available and marked as "bad sectors". Drive block 
  272. devices that are non-disk,  such as "RAM DRIVES", are so marked.  Network 
  273. drives,   that are not accessible by the "IOCTL"  interrupt,  are also so 
  274. marked. 
  275.  
  276. ->·To display the next drive's EXTENDED FILE INFORMATION, press [ENTER].
  277.  
  278. ->·To  cancel the display of EXTENDED FILE INFORMATION and return to  the 
  279. Main Display, press [ESCAPE]. 
  280.  
  281. 6[ENTER] SHELLING TO A FILE MANAGER
  282. FILE_MAN,   another shareware program from MicroMetric,  is a menu driven 
  283. file manager utility.  It,  or another file manager,  may be run directly 
  284. from  DRIV_MAN  to  copy,   move,  delete files  or  perform  other  file 
  285. maintenance functions. 
  286.  
  287. ->·To run the  FILE MANAGER,  first select the desired drive  by pressing 
  288. it's letter,  and then press [ENTER].  ([F4],  which was the FILE MANAGER 
  289. action key in earlier versions, will also initiate this action.) 
  290.  
  291. Registered  users may change the name of the desired file manager by  use 
  292. of the configuration file. 
  293.  
  294. 7CONFIGURATION FILE
  295. The  optional  DRIV_MAN  configuration  file contains all of the  display 
  296. color and position variables.   These  variables are initially set to the 
  297. program  defaults.   They may be edited by use of any  ASCII  editor/word 
  298. processor. 
  299.  
  300. USE OF THE CONFIGURATION FILE IS LIMITED TO REGISTERED USERS.
  301.  
  302. 8DRIV_MAN QUICK ORDER FORM - PRICES VALID THRU 6/95
  303.  
  304. NAME_______________________________ COMPANY______________________________
  305.  
  306. ADDRESS________________________ CITY/STATE/ZIP___________________________
  307. DRIV_MAN, Version 1, single system registration..................... $20. 
  308. DRIV_MAN, Version 1, site license...................................$100. 
  309.   Both include a printed/bound manual and the latest version diskette
  310.   Check one ( )5 1/4"LD  ( )5 1/4"HD  ( )3 1/2"LD  ( )3 1/2"HD[default]
  311.     Shipping - US/Canada/Mexico...................................... $5.
  312.     Shipping - Outside of the US/Canada/Mexico...................... $12.
  313.         Florida residents, add 7% sales tax
  314.         COD(Add $10)/Credit Card orders, call the toll free order line.
  315.  
  316. Press [PrtScreen] to print this quick order form, enter the necessary 
  317. data and mail, with a check in US funds for the total amount, to: 
  318.          MicroMetric
  319.          98 Dade Avenue
  320.          Sarasota, FLorida  34232-1609  USA
  321. Voice: (813) 377-2515           Support BBS: (813) 371-2490 RIME ->ACTION
  322.   FAX: (813) 377-2091  Toll free Order line: (800) 929-0184       [10.94]      
  323. The  BRAND  function accepts entry of the system serial number,  supplied 
  324. upon system registration. 
  325.  
  326. A  REGISTRATION  INFORMATION data entry window is displayed.  Enter  your 
  327. company  name/your name and then the system's serial number (from  inside 
  328. the front cover of the system's manual)  using the alphanumeric  keys and 
  329. the cursor control keys shown on the bottom help line. 
  330.  
  331. ->To exit the program without completing the registration process,  press 
  332. [ESCAPE]. 
  333.  
  334. ->To accept  the name and then the registration number as  edited,  press 
  335. [┘].   An  informational  message will be displayed  when  the  branding 
  336. process is complete for this system. Press any key to continue. 
  337.  
  338. ->If  the registration number as entered is NOT valid,  pressing any key, 
  339. other  than [ESCAPE],  will allow re-entry  of  the registration  number. 
  340. Pressing   [ESCAPE]  will  exit  the  program  without   completing   the 
  341. registration process. 
  342.  
  343.  
  344.  
  345.  
  346.  
  347.